Posts from the Ball Bearing CHRA Category

Choose another category?

Dual Ball Bearing GT25R Turbo

GT2554R

Dual Ball Bearing GT25R Turbo assembly with internal wastegate assembly. .64ar turbine with 5 bolt exit. Very very Good response turbo for 4 Cyl applications. This turbo has a flow capacity of about 240HP.

Turbine
-Wheel: 53mm w/ 62 trim
-Housing: .64 ar

Compressor
-Wheel: 54.3mm w/ 60 trim
-Housing: .80 ar

Turbo unit includes actuator and bracket. This unit is usually in stock and ships withing 1-2 days.

Applicable Garrett P/N’s:

  • 471171-5003S
  • 471171-0003
  • 471171-3
  • 471171-5009S
  • 471171-0009
  • 471171-9
Posted in Ball Bearing CHRA and tagged ,

ATP's 100% stock location GTX3582R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 550HP with awesome spoolup.

EVO GTX3582R

ATP’s 100% stock location GTX3582R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 550HP with awesome spoolup.

Every kit shipped includes these following accessories in addition to the ready to install turbo:

  • -Steel braided oil feed line assembly with banjo at the turbo and at the cylinder head
  • -Oil drain gasket and bolts to attach to stock oil drain tube to the turbo
  • -Banjo bolt and crush washers to attach to stock rear coolant pipe
  • -Steel braided coolant feed line assembly on front of turbo
  • -(4) 10mm studs and nuts for turbo to manifold
  • -(5) 10mm studs and nuts for turbo to 02 housing
  • -2.5″ compressor discharge elbow (replaces the stock 1.75″ J-pipe and rubber hose)

    Application Notes:

  • Compressor inlet options available, please select either the 2.5 in. or 4.0 in. option.

      Installation Notes:

  • Installation guide
    • Posted in Ball Bearing CHRA and tagged , ,

    ATP's 100% stock location GTX3076R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 550HP with awesome spoolu

    EVO GTX3076R

    ATP’s 100% stock location GTX3076R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 550HP with awesome spoolup.

    Every kit shipped includes these following accessories in addition to the ready to install turbo:

    • -Steel braided oil feed line assembly with banjo at the turbo and at the cylinder head
    • -Oil drain gasket and bolts to attach to stock oil drain tube to the turbo
    • -Banjo bolt and crush washers to attach to stock rear coolant pipe
    • -Steel braided coolant feed line assembly on front of turbo
    • -(4) 10mm studs and nuts for turbo to manifold
    • -(5) 10mm studs and nuts for turbo to 02 housing
    • -2.5″ compressor discharge elbow (replaces the stock 1.75″ J-pipe and rubber hose)

      Application Notes:

  • Compressor inlet options available, please select either the 2.5 in. or 4.0 in. option.

      Installation Notes:

  • Installation guide
    • Posted in Ball Bearing CHRA and tagged , ,

    ATP's 100% stock location GTX3071R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 550HP with awesome spoolup.

    EVO GTX3071R

    ATP’s 100% stock location GTX3071R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 550HP with awesome spoolup.

    Every kit shipped includes these following accessories in addition to the ready to install turbo:

    • -Steel braided oil feed line assembly with banjo at the turbo and at the cylinder head
    • -Oil drain gasket and bolts to attach to stock oil drain tube to the turbo
    • -Banjo bolt and crush washers to attach to stock rear coolant pipe
    • -Steel braided coolant feed line assembly on front of turbo
    • -(4) 10mm studs and nuts for turbo to manifold
    • -(5) 10mm studs and nuts for turbo to 02 housing
    • -2.5″ compressor discharge elbow (replaces the stock 1.75″ J-pipe and rubber hose)

      Application Notes:

  • Compressor inlet options available, please select either the 2.5 in. or 4.0 in. option.

      Installation Notes:

  • Installation guide
    • Posted in Ball Bearing CHRA and tagged , ,

    ATP's 100% stock location GT3582R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 600HP with instant spoolup.

    EVO GT3582R

    ATP’s 100% stock location GT3582R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 600HP with instant spoolup.

    Every kit shipped includes these following accessories in addition to the ready to install turbo:

    • -Steel braided oil feed line assembly with banjo at the turbo and at the cylinder head
    • -Oil drain gasket and bolts to attach to stock oil drain tube to the turbo
    • -Banjo bolt and crush washers to attach to stock rear coolant pipe
    • -Steel braided coolant feed line assembly on front of turbo
    • -(4) 10mm studs and nuts for turbo to manifold
    • -(5) 10mm studs and nuts for turbo to 02 housing
    • -2.5″ compressor discharge elbow (replaces the stock 1.75″ J-pipe and rubber hose)

      Application Notes:

  • Compressor inlet options available, please select either the 2.5 in. or 4.0 in. option.

      Installation Notes:

  • Installation guide
    • Posted in Ball Bearing CHRA and tagged , ,

    ATP's 100% stock location GT3076R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 500HP with instant spoolup.

    EVO GT3076R

    ATP’s 100% stock location GT3076R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 500HP with instant spoolup.

    Every kit shipped includes these following accessories in addition to the ready to install turbo:

  • -Steel braided oil feed line assembly with banjo at the turbo and at the cylinder head
  • -Oil drain gasket and bolts to attach to stock oil drain tube to the turbo
  • -Banjo bolt and crush washers to attach to stock rear coolant pipe
  • -Steel braided coolant feed line assembly on front of turbo
  • -(4) 10mm studs and nuts for turbo to manifold
  • -(5) 10mm studs and nuts for turbo to 02 housing
  • -2.5″ compressor discharge elbow (replaces the stock 1.75″ J-pipe and rubber hose)

      • Application Notes:

  • Compressor inlet options available, please select either the 2.5 in. or 4.0 in. option.

      Installation Notes:

  • Installation guide
    • Posted in Ball Bearing CHRA and tagged , ,

    ATP's 100% stock location GT3071R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 450HP with instant spoolup.

    EVO GT3071R

    ATP’s 100% stock location GT3071R turbo kit for the Lancer Evolution 4 through Evo 8/9. Full twin-scroll, twin flapper internal wastegate, dual ball bearing turbo. 450HP with instant spoolup.

    Every kit shipped includes these following accessories in addition to the ready to install turbo:
    Steel braided oil feed line assembly with banjo at the turbo and at the cylinder head

    • -Oil drain gasket and bolts to attach to stock oil drain tube to the turbo
    • -Banjo bolt and crush washers to attach to stock rear coolant pipe
    • -Steel braided coolant feed line assembly on front of turbo
    • -(4) 10mm studs and nuts for turbo to manifold
    • -(5) 10mm studs and nuts for turbo to 02 housing
    • -2.5″ compressor discharge elbow (replaces the stock 1.75″ J-pipe and rubber hose)

      Application Notes:

  • Compressor inlet options available, please select either the 2.5 in. or 4.0 in. option.
      Installation Notes:

  • Installation guide
    • Posted in Ball Bearing CHRA and tagged , ,